The idea behind the knifeOur TiNy series in Floe² design was developed with the aim of offering our uncompromising 3DTi design in an even more compact and lightweight form. The new TiNy Floe² has been revised in detail and the excellent ergonomics of the handle have been further improved. The end of the handle is slightly rounder and there are side recesses to the blade, which allow for a better pinch grip. The finger guard is now pointed, making it even easier to split wood with the handle. All other features remain uncompromising and still unmatched: despite its extremely low weight of only 80 grams, the TiNy with a drop point blade in MagnaCut is as stable as a full tang of the same length. This makes the TiNy the perfect unobtrusive companion for everyday use (EDC) or an uncompromising backup knife with impressive stability. Features & SpecificationsFeaturesStable as a full-tang at only 80 grams weight. Specifically designed for inconspicuous everyday use. 3D-printed, internally hollow titanium handle in non-slip "Floe pattern" for S-XL hands. 10 cm drop point blade in MagnaCut with stonewashed surfacePrinted finger guard for maximum safety.The sharpened finger guard makes it even easier to split wood3D-printed, pull-out force adjustable sheath model "SLIM" made of PA11Recessed lanyard holes100% designed & made in Germany SpecificationsTotal weight: 80 gTotal length: 210 mmBlade length: 100 mm Blade thickness: 2.8 mmBlade steel: MagnaCut @ 64 HRC Handle material: titaniumHandle weight: 38 g The knife in detail The handleThe ultralight and stable 3DTi handle made of titanium with the texturing in Floe pattern enables a safe handling even in sweat, wet and cold due to the uniform roughness. Together with the pronounced finger protection, this ensures maximum safety. Weighing only 38 grams, the handle allows long work without fatigue. In winter, the low mass with the poor thermal conductivity of titanium ensures that the handle is at body temperature in just a few seconds, even in wet and cold conditions, making it suitable for use in all climates. We recommend this grip for glove sizes S-XL.The bladeThe Tiny with 100 mm droppoint blade made of MagnaCut was designed by us as a universal work knife with 2.8 mm blade thickness . The droppoint shape, with its balanced geometry, enables excellent cutting performance with the highest load capacity of the cutting bevel. The stonewashed surface makes the blade insensitive to scratches and lowly reflective. The Ricasso provides long-term resharpenability.

The idea behind the knifeOur TiNy series in Floe design was developed with the goal of offering our no-compromise 3DTi design in even more compact and lightweight form. The TiNy with droppoint blade is, despite the extremely low weight of only 80 grams, as stable as a full-tang of the same length. This makes the TiNy theperfect unobtrusive companion for everyday use(EDC) or a no-compromise backup knife with impressive stability.CAUTION: This knife is offered here without a sheath.Features & SpecificationsFeaturesStable as a full-tang at only 80 grams weight. Specifically designed for inconspicuous everyday use. 3D-printed, internally hollow titanium handle in non-slip "Floe pattern" for S-XL hands. 10 cm drop point bladePrinted finger guard for maximum safety.Recessed lanyard holes100% designed & made in Germany SpecificationsTotal weight: 80 gTotal length: 210 mmBlade length: 100 mm Blade thickness: 2.8 mmBlade steel: 14C28NHandle material: titaniumHandle weight: 38 g The knife in detail The handleThe ultralight and stable 3DTi handle made of titanium with the texturing in Floe pattern enables a safe handling even in sweat, wet and cold due to the uniform roughness. Together with the pronounced finger protection, this ensures maximum safety. Weighing only 38 grams, the handle allows long work without fatigue. In winter, the low mass with the poor thermal conductivity of titanium ensures that the handle is at body temperature in just a few seconds, even in wet and cold conditions, making it suitable for use in all climates. We recommend this grip for glove sizes S-XL.The bladeThe Tiny with 100 mm droppoint blade made of 14C28Nsteel was designed by us as a universal work knife with 2.8 mm blade thickness . The droppoint shape, with its balanced geometry, enables excellent cutting performance with the highest load capacity of the cutting bevel. The stonewashed surface makes the blade insensitive to scratches and is lowly reflective. The Ricasso provides long-term resharpenability.

The idea behind the knifeOur TiNy series in Floe design was developed with the goal of offering our no-compromise 3DTi design in even more compact and lightweight form. The TiNy with droppoint blade is, despite the extremely low weight of only 80 grams, as stable as a full-tang of the same length. This makes the TiNy theperfect unobtrusive companion for everyday use(EDC) or a no-compromise backup knife with impressive stability.Features & SpecificationsFeaturesStable as a full-tang at only 80 grams weight. Specifically designed for inconspicuous everyday use. 3D-printed, internally hollow titanium handle in non-slip "Floe pattern" for S-XL hands. 10 cm drop point blade with stonewashed finishPrinted finger guard for maximum safety. 3D-printed, adjustable sheath model "modular" made of PA11 (polyamide) Flexible steath with the modular UltiLink* systemRecessed lanyard holes100% designed & made in Germany SpecificationsTotal weight: 80Total length: 210 mmBlade length: 100 mm Blade thickness: 2.8 mmBlade steel: 14C28NHandle material: titaniumHandle weight: 38 g The knife in detail The handleThe ultralight and stable 3DTi handlemade of titanium with the texturing in Floe pattern enables a safe handling even in sweat, wet and cold due to the uniform roughness. Together with the pronounced finger protection, this ensures maximum safety. Weighing only 38 grams, the handle allows long work without fatigue. In winter, the low mass with the poor thermal conductivity of titanium ensures that the handle is at body temperature in just a few seconds, even in wet and cold conditions, making it suitable for use in all climates. We recommend this grip for glove sizes S-XL.The bladeThe Tiny with 100 mm droppoint blade made of 14C28N steel was designed by us as a universal work knife with 2.8 mm blade thickness . The droppoint shape, with its balanced geometry, enables excellent cutting performance with the highest load capacity of the cutting bevel. The stonewashed surface makes the blade insensitive to scratches and lowly reflective. The Ricasso provides long-term resharpenability.

The idea behind the knifeOur TiNy series in Floe design was developed with the goal of offering our no-compromise 3DTi design in even more compact and lightweight form. The TiNy with droppoint blade in BALBACHDAMAST® is, despite the extremely low weight of only 80 grams, as stable as a full-tang of the same length. This makes the TiNy the perfect unobtrusive companion for everyday use(EDC) or a no-compromise backup knife with impressive stability.Features & SpecificationsFeaturesStable as a full-tang at only 80 grams weight. Specifically designed for inconspicuous everyday use. 3D-printed, internally hollow titanium handle in non-slip "Floe pattern" for S-XL hands. 10 cm drop point blade in the world's best damask BALBACHDAMAST®.Printed finger guard for maximum safety. 3D-printed, adjustable sheath model "modular" made of PA11 (polyamide) Flexible steath with the modular UltiLink* systemRecessed lanyard holes100% designed & made in Germany SpecificationsTotal weight: 80Total length: 210 mmBlade length: 100 mm Blade thickness: 2.8 mmBlade steel: BALBACHDAMAST®Handle material: titaniumHandle weight: 38 g The knife in detail The handleThe ultralight and stable 3DTi handle made of titanium with the texturing in Floe pattern enables a safe handling even in sweat, wet and cold due to the uniform roughness. Together with the pronounced finger protection, this ensures maximum safety. Weighing only 38 grams, the handle allows long work without fatigue. In winter, the low mass with the poor thermal conductivity of titanium ensures that the handle is at body temperature in just a few seconds, even in wet and cold conditions, making it suitable for use in all climates. We recommend this grip for glove sizes S-XL.The bladeThe Tiny with 100 mm droppoint blade made of the world's best damask from BALBACHDAMAST® was designed by us as a universal work knife with 2.8 mm blade thickness . The droppoint shape, with its balanced geometry, enables excellent cutting performance with the highest load capacity of the cutting bevel. The stonewashed surface makes the blade insensitive to scratches and lowly reflective. The Ricasso provides long-term resharpenability.

The idea behind the knifeOur TiNy series in Floe design was developed with the goal of offering our no-compromise 3DTi design in even more compact and lightweight form. The TiNy with droppoint blade in BALBACHDAMAST® is, despite the extremely low weight of only 80 grams, as stable as a full-tang of the same length. This makes the TiNy the perfect unobtrusive companion for everyday use(EDC) or a no-compromise backup knife with impressive stability.Features & SpecificationsFeaturesStable as a full-tang at only 80 grams weight. Specifically designed for inconspicuous everyday use. 3D-printed, internally hollow titanium handle in non-slip "Floe pattern" for S-XL hands. 10 cm drop point blade in the world's best damask BALBACHDAMAST®.Printed finger guard for maximum safety.Flexible steath with the modular UltiLink* system.Recessed lanyard holes.100% designed & made in Germany.No sheath includedSpecificationsTotal weight: 80Total length: 210 mmBlade length: 100 mm Blade thickness: 2.8 mmBlade steel: BALBACHDAMAST®Handle material: titaniumHandle weight: 38 g The knife in detail The handleThe ultralight and stable 3DTi handle made of titanium with the texturing in Floe pattern enables a safe handling even in sweat, wet and cold due to the uniform roughness. Together with the pronounced finger protection, this ensures maximum safety. Weighing only 38 grams, the handle allows long work without fatigue. In winter, the low mass with the poor thermal conductivity of titanium ensures that the handle is at body temperature in just a few seconds, even in wet and cold conditions, making it suitable for use in all climates. We recommend this grip for glove sizes S-XL.The bladeThe Tiny with 100 mm droppoint blade made of the world's best damask from BALBACHDAMAST® was designed by us as a universal work knife with 2.8 mm blade thickness . The droppoint shape, with its balanced geometry, enables excellent cutting performance with the highest load capacity of the cutting bevel. The stonewashed surface makes the blade insensitive to scratches and lowly reflective. The Ricasso provides long-term resharpenability.

The idea behind the knifeOur TiNy series in Floe design was developed with the goal of offering our no-compromise 3DTi design in even more compact and lightweight form. The TiNy with droppoint blade is, despite the extremely low weight of only 80 grams, as stable as a full-tang of the same length. This makes the TiNy theperfect unobtrusive companion for everyday use(EDC) or a no-compromise backup knife with impressive stability.CAUTION: This knife is offered here without a sheath.Features & SpecificationsFeaturesStable as a full-tang at only 80 grams weight. Specifically designed for inconspicuous everyday use. 3D-printed, internally hollow titanium handle in non-slip "Floe pattern" for S-XL hands. 10 cm drop point bladePrinted finger guard for maximum safety.Recessed lanyard holes100% designed & made in Germany SpecificationsTotal weight: 80 gTotal length: 210 mmBlade length: 100 mm Blade thickness: 2.8 mmBlade steel: MagnaCut @ 64 HRC Handle material: titaniumHandle weight: 38 g The knife in detail The handleThe ultralight and stable 3DTi handle made of titanium with the texturing in Floe pattern enables a safe handling even in sweat, wet and cold due to the uniform roughness. Together with the pronounced finger protection, this ensures maximum safety. Weighing only 38 grams, the handle allows long work without fatigue. In winter, the low mass with the poor thermal conductivity of titanium ensures that the handle is at body temperature in just a few seconds, even in wet and cold conditions, making it suitable for use in all climates. We recommend this grip for glove sizes S-XL.The bladeThe Tiny with 100 mm droppoint blade made of MagnaCut was designed by us as a universal work knife with 2.8 mm blade thickness . The droppoint shape, with its balanced geometry, enables excellent cutting performance with the highest load capacity of the cutting bevel. The stonewashed surface makes the blade insensitive to scratches and is lowly reflective. The Ricasso provides long-term resharpenability.

The idea behind the knifeOur TiNy series in Floe design was developed with the goal of offering our no-compromise 3DTi design in even more compact and lightweight form. The TiNy with droppoint blade in MagnaCut is, despite the extremely low weight of only 80 grams, as stable as a full-tang of the same length. This makes the TiNy the perfect unobtrusive companion for everyday use(EDC) or a no-compromise backup knife with impressive stability.Features & SpecificationsFeaturesStable as a full-tang at only 80 grams weight. Specifically designed for inconspicuous everyday use. 3D-printed, internally hollow titanium handle in non-slip "Floe pattern" for S-XL hands. 10 cm drop point blade in MagnaCut with stonewashed surfacePrinted finger guard for maximum safety. 3D-printed, adjustable sheath model "modular" made of PA11 (polyamide) Flexible steath with the modular UltiLink* systemRecessed lanyard holes100% designed & made in Germany SpecificationsTotal weight: 80Total length: 210 mmBlade length: 100 mm Blade thickness: 2.8 mmBlade steel: MagnaCut Handle material: titaniumHandle weight: 38 g The knife in detail The handleThe ultralight and stable 3DTi handle made of titanium with the texturing in Floe pattern enables a safe handling even in sweat, wet and cold due to the uniform roughness. Together with the pronounced finger protection, this ensures maximum safety. Weighing only 38 grams, the handle allows long work without fatigue. In winter, the low mass with the poor thermal conductivity of titanium ensures that the handle is at body temperature in just a few seconds, even in wet and cold conditions, making it suitable for use in all climates. We recommend this grip for glove sizes S-XL.The bladeThe Tiny with 100 mm droppoint blade made of MagnaCut was designed by us as a universal work knife with 2.8 mm blade thickness . The droppoint shape, with its balanced geometry, enables excellent cutting performance with the highest load capacity of the cutting bevel. The stonewashed surface makes the blade insensitive to scratches and lowly reflective. The Ricasso provides long-term resharpenability.

The idea behind the knifeOur TiNy series with Pango design was developed with the goal of offering our no-compromise 3DTi design in even more compact and lightweight form. The TiNy with droppoint blade is, despite the extremely low weight of only 80 grams, as stable as a full-tang of the same length. This makes the TiNy theperfect unobtrusive companion for everyday use(EDC) or a no-compromise backup knife with impressive stability.CAUTION: This knife is offered here without a sheath.Features & SpecificationsFeaturesStable as a full-tang at only 80 grams weight. Specifically designed for inconspicuous everyday use. 3D-printed, internally hollow titanium handle in non-slip "Pango pattern" for S-XL hands. 10 cm drop point bladePrinted finger guard for maximum safety.Recessed lanyard holes100% designed & made in Germany SpecificationsTotal weight: 80 gTotal length: 210 mmBlade length: 100 mm Blade thickness: 2.8 mmBlade steel: MagnaCut @ 65 HRC Handle material: titaniumHandle weight: 38 g The knife in detail The handleThe ultralight and stable 3DTi handle made of titanium with the texturing in Pango pattern enables a safe handling even in sweat, wet and cold due to the uniform roughness. Together with the pronounced finger protection, this ensures maximum safety. Weighing only 38 grams, the handle allows long work without fatigue. In winter, the low mass with the poor thermal conductivity of titanium ensures that the handle is at body temperature in just a few seconds, even in wet and cold conditions, making it suitable for use in all climates. We recommend this grip for glove sizes S-XL.The bladeThe Tiny with 100 mm droppoint blade made of MagnaCut was designed by us as a universal work knife with 2.8 mm blade thickness . The droppoint shape, with its balanced geometry, enables excellent cutting performance with the highest load capacity of the cutting bevel. The stonewashed surface makes the blade insensitive to scratches and is lowly reflective. The Ricasso provides long-term resharpenability.

The idea behind the knifeOur TiNy series in Pango design was developed with the goal of offering our no-compromise 3DTi design in even more compact and lightweight form. The TiNy with droppoint blade in MagnaCut is, despite the extremely low weight of only 80 grams, as stable as a full-tang of the same length. This makes the TiNy the perfect unobtrusive companion for everyday use(EDC) or a no-compromise backup knife with impressive stability.Features & SpecificationsFeaturesStable as a full-tang at only 80 grams weight. Specifically designed for inconspicuous everyday use. 3D-printed, internally hollow titanium handle in non-slip "Pango pattern" for S-XL hands. 10 cm drop point blade in MagnaCut with stonewashed surfacePrinted finger guard for maximum safety. 3D-printed, adjustable sheath model "modular" made of PA11 (polyamide) Flexible steath with the modular UltiLink* systemRecessed lanyard holes100% designed & made in Germany SpecificationsTotal weight: 80Total length: 210 mmBlade length: 100 mm Blade thickness: 2.8 mmBlade steel: MagnaCut @65 HRCHandle material: titaniumHandle weight: 38 g The knife in detail The handleThe ultralight and stable 3DTi handle made of titanium with the texturing in Pango pattern enables a safe handling even in sweat, wet and cold due to the uniform roughness. Together with the pronounced finger protection, this ensures maximum safety. Weighing only 38 grams, the handle allows long work without fatigue. In winter, the low mass with the poor thermal conductivity of titanium ensures that the handle is at body temperature in just a few seconds, even in wet and cold conditions, making it suitable for use in all climates. We recommend this grip for glove sizes S-XL.The bladeThe Tiny with 100 mm droppoint blade made of MagnaCut was designed by us as a universal work knife with 2.8 mm blade thickness . The droppoint shape, with its balanced geometry, enables excellent cutting performance with the highest load capacity of the cutting bevel. The stonewashed surface makes the blade insensitive to scratches and lowly reflective. The Ricasso provides long-term resharpenability.

The idea behind the knifeOur TiNy series with Streamdesign was developed with the goal of offering our no-compromise 3DTi design in even more compact and lightweight form. The TiNy with droppoint blade is, despite the extremely low weight of only 80 grams, as stable as a full-tang of the same length. This makes the TiNy theperfect unobtrusive companion for everyday use(EDC) or a no-compromise backup knife with impressive stability.CAUTION: This knife is offered here without a sheath.Features & SpecificationsFeaturesStable as a full-tang at only 80 grams weight. Specifically designed for inconspicuous everyday use. 3D-printed, internally hollow titanium handle in non-slip "Stream pattern" for S-XL hands. 10 cm drop point bladePrinted finger guard for maximum safety.Recessed lanyard holes100% designed & made in Germany SpecificationsTotal weight: 80 gTotal length: 210 mmBlade length: 100 mm Blade thickness: 2.8 mmBlade steel: MagnaCut @ 65 HRC Handle material: titaniumHandle weight: 38 g The knife in detail The handleThe ultralight and stable 3DTi handle made of titanium with the texturing in Stream pattern enables a safe handling even in sweat, wet and cold due to the uniform roughness. Together with the pronounced finger protection, this ensures maximum safety. Weighing only 38 grams, the handle allows long work without fatigue. In winter, the low mass with the poor thermal conductivity of titanium ensures that the handle is at body temperature in just a few seconds, even in wet and cold conditions, making it suitable for use in all climates. We recommend this grip for glove sizes S-XL.The bladeThe Tiny with 100 mm droppoint blade made of MagnaCut was designed by us as a universal work knife with 2.8 mm blade thickness . The droppoint shape, with its balanced geometry, enables excellent cutting performance with the highest load capacity of the cutting bevel. The stonewashed surface makes the blade insensitive to scratches and is lowly reflective. The Ricasso provides long-term resharpenability.

The idea behind the knifeOur TiNy series in Stream design was developed with the goal of offering our no-compromise 3DTi design in even more compact and lightweight form. The TiNy with droppoint blade in MagnaCut is, despite the extremely low weight of only 80 grams, as stable as a full-tang of the same length. This makes the TiNy the perfect unobtrusive companion for everyday use(EDC) or a no-compromise backup knife with impressive stability.Features & SpecificationsFeaturesStable as a full-tang at only 80 grams weight. Specifically designed for inconspicuous everyday use. 3D-printed, internally hollow titanium handle in non-slip "Stream pattern" for S-XL hands. 10 cm drop point blade in MagnaCut with stonewashed surfacePrinted finger guard for maximum safety. 3D-printed, adjustable sheath model "modular" made of PA11 (polyamide) Flexible steath with the modular UltiLink* systemRecessed lanyard holes100% designed & made in Germany SpecificationsTotal weight: 80Total length: 210 mmBlade length: 100 mm Blade thickness: 2.8 mmBlade steel: MagnaCut @65 HRCHandle material: titaniumHandle weight: 38 g The knife in detail The handleThe ultralight and stable 3DTi handle made of titanium with the texturing in Stream pattern enables a safe handling even in sweat, wet and cold due to the uniform roughness. Together with the pronounced finger protection, this ensures maximum safety. Weighing only 38 grams, the handle allows long work without fatigue. In winter, the low mass with the poor thermal conductivity of titanium ensures that the handle is at body temperature in just a few seconds, even in wet and cold conditions, making it suitable for use in all climates. We recommend this grip for glove sizes S-XL.The bladeThe Tiny with 100 mm droppoint blade made of MagnaCut was designed by us as a universal work knife with 2.8 mm blade thickness . The droppoint shape, with its balanced geometry, enables excellent cutting performance with the highest load capacity of the cutting bevel. The stonewashed surface makes the blade insensitive to scratches and lowly reflective. The Ricasso provides long-term resharpenability.

The idea behind the knife We designed our TiRex series in a GRAVEL design as an uncompromising and compact EDC knife. The TiRex comes with a 6 cm-long Reverse Tanto blade in 14C28N steel. Thanks to our 3DTi construction, the knife weighs only 32 grams at 14 cm in total length, making it the perfect inconspicuous companion for your pocket (EDC). Features & Specifications Features As stable as a full tang at only 32 grams in weightDeveloped specifically for inconspicuous everyday use3D-printed, hollow-core titanium handle in non-slip “Gravel” for S-XL hands6 cm reverse Tanto blade with stonewashed finish Recessed lanyard holes 100% designed & made in GermanyKydex sheath with eyelets for UltiClip and lanyard Specifications Total weight: 32 g Total length: 137 mm Blade length: 60 mm Blade thickness: 2 mm Blade steel: 14C28N with 60 HRC Handle material: Titanium Handle weight: 17 g The knife in detail The handle The ultralight and sturdy 3DTi handle made of titanium with a gravel pattern allows for secure handling even in sweaty, wet and cold conditions for maximum safety – and it just looks good! The ergonomics of the handle with a recessed back of the blade enable an amazing cutting performance despite the small size. In winter, the low mass and low heat conductivity of titanium ensure that the handle reaches body temperature in just a few seconds, even in wet and cold conditions, making it suitable for use in all weather conditions. The Blade The TiRex with a 60 mm reverse Tanto blade with full-height flat grind in 14C28N steel was designed by us as the ultimate EDC with a 2 mm blade thickness. The blade shape, with its balanced geometry, enables excellent cutting performance and precise, controlled work. The stonewashed finish makes the blade resistant to scratches and less reflective. The sheath The knife is shipped with a Kydex sheath without attachment. We recommend the UltiClip SLIM 2.2 for this sheath, which will soon be available in our store. This makes it possible to carry the knife without fastening it in a trouser pocket or with a lanyard as a neck knife.In the future, more sheaths, such as a leather sheath, will be available for the TiRex.

The idea behind the knife We designed our TiRex series in a GRAVEL design as an uncompromising and compact EDC knife. The TiRex comes with a 6 cm-long Reverse Tanto blade in MagnaCut. Thanks to our 3DTi construction, the knife weighs only 32 grams at 14 cm in total length, making it the perfect inconspicuous companion for your pocket (EDC). Features & Specifications Features As stable as a full tang at only 32 grams in weightDeveloped specifically for inconspicuous everyday use3D-printed, hollow-core titanium handle in non-slip “Gravel” for S-XL hands6 cm reverse Tanto blade in Magna Cut with stonewashed finish Recessed lanyard holes 100% designed & made in GermanyKydex sheath with eyelets for UltiClip and lanyard Specifications Total weight: 32 g Total length: 137 mm Blade length: 60 mm Blade thickness: 2 mm Blade steel: MagnaCut with 64 HRC Handle material: Titanium Handle weight: 17 g The knife in detail The handle The ultralight and sturdy 3DTi handle made of titanium with a gravel pattern allows for secure handling even in sweaty, wet and cold conditions for maximum safety – and it just looks good! The ergonomics of the handle with a recessed back of the blade enable an amazing cutting performance despite the small size. In winter, the low mass and low heat conductivity of titanium ensure that the handle reaches body temperature in just a few seconds, even in wet and cold conditions, making it suitable for use in all weather conditions. The Blade The TiRex with a 60 mm reverse Tanto blade with full-height flat grind in MagnaCut was designed by us as the ultimate EDC with a 2 mm blade thickness. The blade shape, with its balanced geometry, enables excellent cutting performance and precise, controlled work. The stonewashed finish makes the blade resistant to scratches and less reflective. The sheath In the future, more sheaths, such as a leather sheath, will be available for the TiRex.

The idea behind the knife We designed our TiRex series in a SPIKE design as an uncompromising and compact EDC knife. The TiRex comes with a 6 cm-long Reverse Tanto blade in 14C28N steel. Thanks to our 3DTi construction, the knife weighs only 32 grams at 14 cm in total length, making it the perfect inconspicuous companion for your pocket (EDC). Features & Specifications Features As stable as a full tang at only 32 grams in weightDeveloped specifically for inconspicuous everyday use3D-printed, hollow-core titanium handle in non-slip “SPIKE” for S-XL hands6 cm reverse Tanto blade with stonewashed finish Recessed lanyard holes 100% designed & made in GermanyKydex sheath with eyelets for UltiClip and lanyard Specifications Total weight: 32 g Total length: 137 mm Blade length: 60 mm Blade thickness: 2 mm Blade steel: 14C28N with 60 HRC Handle material: Titanium Handle weight: 17 gKydex sheath with eyelets for UltiClip and lanyard The knife in detail The handle The ultralight and sturdy 3DTi handle made of titanium with a SPIKE pattern allows for secure handling even in sweaty, wet and cold conditions for maximum safety – and it just looks good! The ergonomics of the handle with a recessed back of the blade enable an amazing cutting performance despite the small size. In winter, the low mass and low heat conductivity of titanium ensure that the handle reaches body temperature in just a few seconds, even in wet and cold conditions, making it suitable for use in all weather conditions. The Blade The TiRex with a 60 mm reverse Tanto blade with full-height flat grind in 14C28N steel was designed by us as the ultimate EDC with a 2 mm blade thickness. The blade shape, with its balanced geometry, enables excellent cutting performance and precise, controlled work. The stonewashed finish makes the blade resistant to scratches and less reflective. The sheathThe knife is shipped with a Kydex sheath without attachment. We recommend the UltiClip SLIM 2.2 for this sheath, which will soon be available in our store. This makes it possible to carry the knife without fastening it in a trouser pocket or with a lanyard as a neck knife.In the future, more sheaths, such as a leather sheath, will be available for the TiRex.

The idea behind the knife We designed our TiRex series in a SPIKE design as an uncompromising and compact EDC knife. The TiRex comes with a 6 cm-long Reverse Tanto blade in MagnaCut. Thanks to our 3DTi construction, the knife weighs only 32 grams at 14 cm in total length, making it the perfect inconspicuous companion for your pocket (EDC). Features & Specifications Features As stable as a full tang at only 32 grams in weightDeveloped specifically for inconspicuous everyday use3D-printed, hollow-core titanium handle in non-slip “SPIKE” for S-XL hands6 cm reverse Tanto blade in Magna Cut with stonewashed finish Recessed lanyard holes 100% designed & made in GermanyKydex sheath with eyelets for UltiClip and lanyard Specifications Total weight: 32 g Total length: 137 mm Blade length: 60 mm Blade thickness: 2 mm Blade steel: MagnaCut with 64 HRC Handle material: Titanium Handle weight: 17 g The knife in detail The handle The ultralight and sturdy 3DTi handle made of titanium with a SPIKE pattern allows for secure handling even in sweaty, wet and cold conditions for maximum safety – and it just looks good! The ergonomics of the handle with a recessed back of the blade enable an amazing cutting performance despite the small size. In winter, the low mass and low heat conductivity of titanium ensure that the handle reaches body temperature in just a few seconds, even in wet and cold conditions, making it suitable for use in all weather conditions. The Blade The TiRex with a 60 mm reverse Tanto blade with full-height flat grind in MagnaCut was designed by us as the ultimate EDC with a 2 mm blade thickness. The blade shape, with its balanced geometry, enables excellent cutting performance and precise, controlled work. The stonewashed finish makes the blade resistant to scratches and less reflective. The sheath The knife is shipped with a Kydex sheath without attachment. We recommend the UltiClip SLIM 2.2 for this sheath, which will soon be available in our store. This makes it possible to carry the knife without fastening it in a trouser pocket or with a lanyard as a neck knife.In the future, more sheaths, such as a leather sheath, will be available for the TiRex.

The Idea Behind the Knife Our friend Roman had been experimenting with the design of our 3DTi TiRex—and from that, the idea for this tool was born. Together, we further developed the concept and initially created two variants: ultra-light EDC tools designed for standard 19 mm utility blades with a maximum length of 61 mm. Thanks to the interchangeable blade system, you always have access to a sharp and affordable cutting edge—and if needed, the blades can of course be resharpened. The 3D-printed PA11 sheath ensures a secure fit and also allows the tool to be carried as a neck knife. A concealed lanyard hole is integrated at the end of the handle. This model comes without clip and ring. If these are desired, please select the corresponding version. Features & SpecificationsFeatures Ultra-light EDC tool for interchangeable blades Designed for discreet everyday carry 3D-printed hollow titanium handle made from Ti6Al4V Compatible with 19 mm utility blades up to 61 mm length Concealed lanyard hole100% designed & made in Germany

The Idea Behind the Knife Our friend Roman had been experimenting with the design of our 3DTi TiRex—and from that, the idea for this tool was born. Together, we refined the concept and developed two initial variants: ultra-light EDC tools designed for standard 19 mm utility blades with a maximum length of 61 mm. Thanks to the interchangeable blade system, you always have access to a sharp and affordable cutting edge—and if needed, the blades can of course be resharpened. The 3D-printed PA11 sheath ensures a secure fit and also allows the tool to be carried as a neck knife. This model comes with the practical 3DTi titanium clip, allowing for true deep-carry in the pocket and making it perfectly suited for everyday use. A concealed lanyard hole is integrated at the end of the handle. Please include the following information in your order comments: Should the clip be mounted for left or right carry (viewed from the spine)? Features & Specifications Features Ultra-light EDC tool for interchangeable blades Designed for discreet everyday carry 3D-printed hollow titanium handle made from Ti6Al4V Compatible with 19 mm utility blades up to 61 mm length Concealed lanyard hole Equipped with 3DTi clip for deep-carry pocket carry 100% designed & made in Germany Specifications Total weight: 22 g (without sheath), 30 g (with sheath) Overall length: 161 mm with blade Blade length: max. 60 mm Blade thickness: approx. 0.6 mm Handle material: titanium Sheath material: PA11

The Idea Behind the Knife Our friend Roman had been experimenting with the design of our 3DTi TiRex—and from that, the idea for this tool was born. Together, we refined the concept and developed two initial variants: ultra-light EDC tools designed for standard 19 mm utility blades with a maximum length of 61 mm. Thanks to the interchangeable blade system, you always have access to a sharp and affordable cutting edge—and if needed, the blades can of course be resharpened. The 3D-printed PA11 sheath ensures a secure fit and also allows the tool to be carried as a neck knife. This model comes with the practical 3DTi titanium clip and ring bead, allowing for true deep-carry in the pocket and making it perfectly suited for everyday use. The ring bead is a true highlight of this knife: it enables quick “flipping”, effectively extends the handle, and provides a much more secure and substantial grip. At the same time, it allows for fast and intuitive retrieval from the pocket. Please include the following two details in your order comments: 1. Which lanyard pattern you prefer (see photo) 2. Should the clip be mounted for left or right carry (viewed from the spine)? Features & Specifications Features Ultra-light EDC tool for interchangeable blades Designed for discreet everyday carry 3D-printed hollow titanium handle made from Ti6Al4V Compatible with 19 mm utility blades up to 61 mm length Concealed lanyard hole with ring bead Equipped with 3DTi clip for deep-carry pocket carry 100% designed & made in Germany Specifications Total weight: 22 g (without sheath), 30 g (with sheath) Overall length: 161 mm with blade Blade length: max. 60 mm Blade thickness: approx. 0.6 mm Handle material: titanium Sheath material: PA11

The idea behind the knife Our friend Roman had been experimenting with the design of our 3DTi TiRex—and from that, the concept for this tool was born. Together, we refined the idea and developed two initial variants: ultra-light EDC tools designed for standard 19 mm utility blades with a maximum length of 61 mm. Thanks to the interchangeable blade system, you always have access to a sharp and affordable edge—and if needed, the blades can of course be resharpened. The 3D-printed PA11 sheath ensures a secure fit and also allows the tool to be carried as a neck knife. An integrated glass breaker at the end of the handle adds a practical safety feature. A smart detail: the tool can even be used as a glass breaker while still in the sheath. Features & Specifications Features Ultra-light EDC tool for interchangeable blades Designed for discreet everyday carry 3D-printed hollow titanium handle made from Ti6Al4V Compatible with 19 mm utility blades up to 61 mm length Integrated glass breaker at the handle end Can also be used as a kubotan when sheathed 100% designed & made in Germany Specifications Total weight: 22 g (without sheath), 30 g (with sheath) Overall length: 161 mm with blade Blade length: max. 60 mm Blade thickness: approx. 0.6 mm Handle material: titanium Sheath material: PA11