3DTi-Sheaths
3DTi Sheath "Basic" for TiNy Droppint left-handed
This 3DTi knife sheath made of PA 11 (polyamide) fits the TiNy with Droppoint (blade steel doesn't matter). The sheath "Basic" comes with a printed belt loop. This variant is designed for left-handers. The belt width can be extended from 41mm to 51mm (removing the insert). The sheath has an eyelet for 4mm paracord, which makes the knife very good to wear as a neckknife.Knife not included. Maximum belt width is 51 mm.
3DTi Sheath "Basic" for TiNy Droppoint right-handed
This 3DTi knife sheath made of PA 11 (polyamide) fits the TiNy with Droppoint (blade steel doesn't matter). The sheath "Basic" comes with a printed belt loop. This variant is designed for right-handers. The belt width can be extended from 41mm to 51mm (removing the insert). The sheath has an eyelet for 4mm paracord, which makes the knife very good to wear as a neckknife.Knife not included. The maximum belt width is 51 mm.
3DTi Sheath "Basic" for TiNy Droppoint right-handed
This 3DTi knife sheath made of PA 11 (polyamide) fits the TiNy with Droppoint (blade steel doesn't matter). The sheath "Basic" comes with a printed belt loop. This variant is designed for right-handers. The belt width can be extended from 41mm to 51mm (removing the insert). The sheath has an eyelet for 4mm paracord, which makes the knife very good to wear as a neckknife.Knife not included. The maximum belt width is 51 mm.
3DTi Sheath "Basic" for TiNy Droppoint right-handed
This 3DTi knife sheath made of PA 11 (polyamide) fits the TiNy with Droppoint (blade steel doesn't matter). The sheath "Basic" comes with a printed belt loop. This variant is designed for right-handers. The belt width can be extended from 41mm to 51mm (removing the insert). The sheath has an eyelet for 4mm paracord, which makes the knife very good to wear as a neckknife.Knife not included. The maximum belt width is 51 mm.
3DTi Sheath "Basic" for TiNy Sheepfoot left-handed
This 3DTi knife sheath made of PA 11 (polyamide) fits the TiNy with Sheepfoot (blade steel doesn't matter). The sheath "Basic" comes with a printed belt loop. This variant is designed for left-handers.Knife not included. Maximum belt width is 41 mm.
3DTi Sheath "Modular" for TiNy Droppoint left-handed
This 3DTi knife sheath made of PA 11 (polyamide) fits a TiNy with a Droppoint blade( steel doesn't matter). The sheath comes with the modular UltiLink for a variety of carrying options. This variant is designed for left-handers.Knife not included.
3DTi Sheath "Modular" for TiNy Droppoint right-handed
This 3DTi knife sheath made of PA 11 (polyamide) fits a TiNy with a droppoint blade( steel doesn't matter). The sheath comes with the modular UltiLink for a variety of carrying options. This variant is designed for right-handers.Knife not included.
3DTi Sheath "Modular" for TiNy Sheepfoot left-handed
This 3DTi knife sheath made of PA 11 (polyamide) fits the TiNy with Sheepfoot (blade steel doesn't matter). The sheath "Modular" comes with a printed belt loop. This variant is designed for left-handers.Knife not included. Please indicate during checkout in the commentary box whether you want your belt loop in 41 mm or 51 mm.
3DTi Sheath "Modular" for TiNy Sheepfoot right-handed
This 3DTi knife sheath made of PA 11 (polyamide) fits the TiNy with Sheepfoot (blade steel doesn't matter). The sheath "Modular" comes with a printed belt loop. This variant is designed for right-handers.Knife not included. Please indicate during checkout in the commentary box whether you want your belt loop in 41 mm or 51 mm.
3DTi Sheath for Squad Bushcraft right-handed
This 3DTi knife sheath made of PA 11 (polyamide) fits all 3DTi-knives with a Squad handle (steel doesn't matter) and a bushcraft blade. The sheath comes with the modular UltiLink for a variety of carrying options. This variant is designed for right-handers.
3DTi Sheath for Squad Bushcraft right-handed
This 3DTi knife sheath made of PA 11 (polyamide) fits all 3DTi-knives with a Squad handle (steel doesn't matter) and a special force blade. The sheath comes with the modular UltiLink for a variety of carrying options. This variant is designed for right-handers.
3DTi Sheath for Squad Compact Survival right-handed
This 3DTi knife sheath made of PA 11 (polyamide) fits all 3DTi-knives with a Squad handle (steel doesn't matter) and a compact survival blade. The sheath comes with the modular UltiLink for a variety of carrying options. This variant is designed for right-handers.
3DTi Sheath for UniTi Bushcraft right-handed
This 3DTi knife sheath made of PA 11 (polyamide) fits all 3DTi-knives with a UniTi handle (handle pattern and steel don't matter) and a bushcraft blade. The sheath comes with the modular UltiLink for a variety of carrying options. This variant is designed for right-handers.
3DTi Sheath for UniTi Compact Survival right-handed
This 3DTi knife sheath made of PA 11 (polyamide) fits all 3DTi-knives with a UniTi handle (handle pattern and steel don't matter) and a compact survival blade. The sheath comes with the modular UltiLink for a variety of carrying options. This variant is designed for right-handers.
3DTi Sheath for UniTi Sheepfoot right-handed
This 3DTi knife sheath made of PA 11 (polyamide) fits all 3DTi-knives with a UniTi handle (handle pattern and steel don't matter) and a sheepfoot blade. The sheath comes with the modular UltiLink for a variety of carrying options. This variant is designed for right-handers.
3DTi Sheath for UniTi Special Force right-handed
This 3DTi knife sheath made of PA 11 (polyamide) fits all 3DTi-knives with a UniTi handle (handle pattern and steel don't matter) and a special force blade. The sheath comes with the modular UltiLink for a variety of carrying options. This variant is designed for right-handers.
3DTi Sheath for UniTi Survival left-handed
This 3DTi knife sheath made of PA 11 (polyamide) fits all 3DTi-knives with a UniTi handle (handle pattern and steel don't matter) and a survival blade. The sheath comes with the modular UltiLink for a variety of carrying options. This variant is designed for left-handers.
3DTi Sheath for UniTi Survival right-handed
This 3DTi knife sheath made of PA 11 (polyamide) fits all 3DTi-knives with a UniTi handle (handle pattern and steel don't matter) and a 15 cm survival blade. The sheath comes with the modular UltiLink for a variety of carrying options. This variant is designed for right-handers.
New
3DTi-Dangler for Sheath with UltiLink (87mm)
Our new dangler is finally available—it was created in response to popular demand and has been tested in everyday use for a long time. The dangler was developed for our sheaths with the proven UltiLink system, which is used in our TiNy Modular sheaths and all UniTi and MighTi sheaths, for example. The knife can be worn lower on the belt, as many customers are already used to with other sheaths (e.g., leather). The material is 3D-printed PA11, which already works excellently with the 3dTi sheaths. Thanks to its rigidity, the knife does not wobble on the hip but offers enough flexibility so as not to interfere when sitting down. The dangler is attached to the belt via a hook and a Velcro loop, which allows for a snug fit on any belt width. A recess on the back allows it to be attached to tactical belts with MOLLE fastenings. Furthermore, the sheath can of course be removed from the dangler with a single movement, and the 360° freedom of alignment remains.With the dangler, the knife hangs 87 mm lower on the belt, measured from the top edge of the belt to the center of the UltiLink pinion.
3DTi-sheath "Slim" for TiNy Droppoint
This 3DTi-knife sheath made of PA 11 (polyamide) fits the TiNy with a drop point blade (steel type irrelevant). The “Slim” sheath is designed to be carried in a pocket, jacket, or as a backup in a backpack.
Knife not included.
Belt loop 41 mm for 3DTi sheath
This belt loop in 41 mm height fits all 3DTi scabbards except the TiNy-Basic scabbard. A 51 mm version is also available for wider belts. Important: Only the belt loop included, not the complete UltiLink mount on our 3DTi sheaths. A belt loop is included in every knife purchase that includes a 3DTi sheath.
Belt loop 51 mm for 3DTi sheath
This belt loop in 51 mm height fits all 3DTi scabbards except the TiNy-Basic scabbard. A 41 mm version is also available for narrower belts. Important: Only the belt loop included, not the complete UltiLink mount on our 3DTi sheaths. A belt loop is included in every knife purchase that includes a 3DTi sheath.
UltiLink Velcro belt-loop
With this belt loop, we offer a new solution for all those for whom the fixed belt loops did not fit. This belt loop is firmly attached to the belt or other straps using the Velcro strip supplied. The connection is therefore modular, backlash-free and resilient. The clip fits over belts with a maximum thickness of 5 mm and belt widths of 35 mm to 65 mm, whereby the Velcro can be shortened individually. Is this option not yet suitable for your needs? Please contact us and we can implement individual solutions at short notice using 3D printing.
Our 3DTi Handles
Our 3D-printed titanium handles were developed by us with clear goals: To achieve the best balance of weight and stability with the highest functionality and perfect ergonomics. In many iterations, the moulds were repeatedly adjusted over a year and subjected to strict stress tests of the knives (and our nerves) until we were satisfied with the result. With a average wall thickness of 1 mm, the high-strength titanium of the handle is still incredibly stable and allows for a blade with an unusually short tang that has no disadvantages: the titanium supports the tang and force is dissipated into the handle evenly. In addition to the extreme weight saving, another advantage is a large hollow space inside (expect with TiNy-models) which, in combination with our titanium screw cap, provides a storage space for various applications. In addition to our ruby sharpening rod, each individually important item can be stored absolutely dry in the handle.
Our Blades
We source our blades from a renowned Solingen contract grinder, with whom we also work together on the optimal ergonomics of our blades and select suitable steels. We have our blades hardened at the special German hardening shop Werz. Here we have full control over the final result. We fit the blades into the handle without play and glue them into the titanium handle over the entire surface with high-strength adhesive. For even more safety, with most models the blade is additionally screwed from the inside. So it remains fully functional in the unlikely event of the adhesive coming off. The adhesive reliably seals the gap to the handle and prevents dirt and moisture from penetrating. It is possible to have worn or damaged blades replaced by us at a reasonable price.
Our Sheaths
Knife sheaths have always been one of our biggest bottlenecks. Knife sheaths typically are made of leather or Kydex and are produced by hand. Due to our large number of blade-handle combinations, we were unable to have sufficient quantities produced economically. The problem: injection moulded sheaths were far from meeting our requirements. That's why we developed 3D printable sheaths especially for our knives. They are made of PA11 (polyamide) and have, varying by model, for example a removable belt loop, drain holes, an adjusting screw for the perfect fit of the knife and other features. They are available for right- & left-handers. In the future we will offer 3D-printed sheaths and leather sheaths.
Skip product gallery
Regular price:
€199.00
Unsere 3DTi-Messer
TiNy "Floe" with Droppoint blade in 14C28N steel (without sheath)
The idea behind the knifeOur TiNy series in Floe design was developed with the goal of offering our no-compromise 3DTi design in even more compact and lightweight form. The TiNy with droppoint blade is, despite the extremely low weight of only 80 grams, as stable as a full-tang of the same length. This makes the TiNy theperfect unobtrusive companion for everyday use(EDC) or a no-compromise backup knife with impressive stability.CAUTION: This knife is offered here without a sheath.Features & SpecificationsFeaturesStable as a full-tang at only 80 grams weight.
Specifically designed for inconspicuous everyday use.
3D-printed, internally hollow titanium handle in non-slip "Floe pattern" for S-XL hands.
10 cm drop point bladePrinted finger guard for maximum safety.Recessed lanyard holes100% designed & made in Germany
SpecificationsTotal weight: 80 gTotal length: 210 mmBlade length: 100 mm
Blade thickness: 2.8 mmBlade steel: 14C28NHandle material: titaniumHandle weight: 38 g
The knife in detail
The handleThe ultralight and stable 3DTi handle made of titanium with the texturing in Floe pattern enables a safe handling even in sweat, wet and cold due to the uniform roughness. Together with the pronounced finger protection, this ensures maximum safety. Weighing only 38 grams, the handle allows long work without fatigue. In winter, the low mass with the poor thermal conductivity of titanium ensures that the handle is at body temperature in just a few seconds, even in wet and cold conditions, making it suitable for use in all climates. We recommend this grip for glove sizes S-XL.The bladeThe Tiny with 100 mm droppoint blade made of 14C28Nsteel was designed by us as a universal work knife with 2.8 mm blade thickness . The droppoint shape, with its balanced geometry, enables excellent cutting performance with the highest load capacity of the cutting bevel. The stonewashed surface makes the blade insensitive to scratches and is lowly reflective. The Ricasso provides long-term resharpenability.